Page 1 of 1

Installing LTSP

Posted: May 28th, 2014, 2:27 pm
by aroeland
Hello,

Today I discovered this website and I am very impressed, there is lots for me to learn here. Thank you for that! :-). I am following the guide to install LTSP, which is quite clear but I get stuck anyways.

Like in the guide I have a separate DHCP server and I don't really understand which file to edit. I have edited the /etc/ltsp/dhcpd.conf file on the LTSP server and changed everything that was red in the guide. Should I then not change the config file on the DHCP server as well?

All the best,
Arnoud Roeland

Re: Installing LTSP

Posted: June 1st, 2014, 7:33 pm
by dallco
Hi,

Also enjoy the howto.
/etc/ltsp/dhcpd.conf is according to the header text in /etc/dhcp/dhcpd.conf prevelent.

Code: Select all

#
# Sample configuration file for ISC dhcpd for Debian
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#
#
But setting the subnet and range in /etc/dhcp/dhcpd.conf

Code: Select all

subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.200 192.168.1.250;
#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
}
brings me futher...the ltsp server is now functioning as DHCP server.
Now I'm heading in the right direction because my client gets the login screen. Sadly I am stuck at this point. Client say's verifying password and then jumps back to the login screen again... :eh: ??

BTW working on trusty (14.04) server. XBMC frontend

GRTZ Frank